Press releases, press photos and other material for editorial coverage of Windtuner.

14  Aug  2026

WINDTUNER  builds custom five-hole probes for exactly these situations. We take the customer's test geometry, access constraints, and flow conditions as the starting point, then design a probe that fits the setup rather than forcing the setup to accommodate the probe. Over ten thousand designs and more than a hundred thousand calibration records back up this approach.

12  Aug  2026

Most wind tunnel campaigns are not one-off experiments. A typical program might run the same model at five Mach numbers with three model attitudes each. The scanner has to deliver the same uncertainty budget at the end of the week that it delivered on Monday morning.

10  Aug  2026

WINDTUNER  pressure scanner sit at the center of this process, converting physical pressure into digital data that engineers use to make design decisions. With ±0.05% FS accuracy across 16 channels per unit, these scanners give test teams the resolution they need to capture the pressure gradients that define engine performance.

05  Aug  2026

A Pitot tube does not read airspeed directly. The Pitot tube’s head faces the flow and brings the air near the opening to a stop, turning part of the flow’s kinetic energy into pressure. The instrument measures that pressure state first.

03  Aug  2026

It needs calibration coefficients tied to the probe, the pressure scanner channels, and the tested Mach and angle range. As the provider of , WINDTUNER has a complete systematic link across our product line, including the pressure probe, pressure scanner, calibration wind tunnel, and WindLabX measurement and control software.

31  Jul  2026

Environmental wind tunnel pressure measurement is becoming more demanding as test facilities add temperature and altitude simulation to airflow testing. On July 10, 2026, the NAST environmental wind tunnel in Wuhan entered service for hydrogen-vehicle testing with an operating envelope that puts pressure acquisition inside a changing thermal and barometric environment.

29  Jul  2026

Pressure scanner calibration often appears on a test plan as a laboratory task completed before the hardware reaches the rig. WINDTUNER pressure scanners bring internal zero calibration, full-scale calibration, and multi-point calibration into the measurement workflow.

27  Jul  2026

A wind tunnel measurement system has to do more than collect pressure at a fixed point. A wake survey or compressor-stage test may require hundreds of positions, synchronized pressure channels, calibrated probe coefficients, and a clear flow map before the next model change. WINDTUNER brings the pneumatic probe, electric actuator, pressure scanner, measurement and control software, and calibration wind tunnel into one production chain.

24  Jul  2026

Engine run fast, even in tests: A compressor surge can reach the spike gas path temperature of hundreds of degrees in seconds. In another instance, an afterburner light-off step must be captured before the control system acts.