23 Oct 2026
3D Flow Measurement System ExplainedA 3D flow measurement system brings pneumatic probes, acquisition equipment, motion control, and measurement and control software together.
12 Oct 2026
Pressure Scanner vs. Pressure SensorA pressure scanner and a pressure sensor both measure pressure, but they serve different roles in a test system.
05 Oct 2026
Pitot-Static Probe vs. Total Pressure ProbeWINDTUNER's total pressure probes and other pneumatic probes are mainly used during product development and testing, where engineers need to examine the flow at specific points. A pitot-static probe is mounted on a UAV or other aircraft to provide continuous total- and static-pressure signals in flight.
23 Sep 2026
3-Hole Probe vs. 5-Hole ProbeA 3-hole probe is generally the more direct choice for velocity and direction measurements in a two-dimensional plane. A 5-hole probe is intended for three-dimensional flow and resolves angular changes in two directions.
14 Sep 2026
How to Choose a Pressure Scanner for Wind Tunnel Testing: Standard, Differential, and Atmospheric ModelsThe right pressure scanner is the one that matches the measurement target, reference pressure, channel count, and data-processing method. The standard model handles multipoint pressure acquisition, the differential model measures the pressure difference between two ports, and the atmospheric model records ambient pressure.
09 Sep 2026
Miniature Five-Hole Probe Anemometer: Pressure, Flow Velocity, and Direction from One InstrumentA miniature five-hole probe anemometer combines a five-hole probe, pressure measurement, environmental sensing, and data processing in a portable unit.
26 Aug 2026
How the Five-Hole Probe Is Changing the Way Engineers Read the WindA calibrated five-hole probe turns an invisible three-dimensional flow into speed, direction and pressure data, revealing losses that computer models and single-point instruments can miss.
07 Aug 2026
Ethernet Intelligent Pressure Scanner Range Selection Starts with the TestAn ethernet intelligent pressure scanner can carry an accuracy specification of ±0.05% FS and still be the wrong choice for a test if its selected range does not match the pressure being measured. Full-scale accuracy ties the error limit to the instrument range, not to each reading.
30 Jun 2026
The Three-Hole Probe in Low-Speed Wind Tunnels: A Practical Workhorse for 2D Flow MeasurementInstead, they are the ones that sit comfortably in the middle—simple enough to deploy quickly, but reliable enough to trust without hesitation.
Welcome to learn more detailed practical cases！Product recommendation
Ethernet Intelligent Pressure Scanners
Accurate, stable and high performance gas pressure measurements for: aero engines, gas turbines, and wind tunnel experiments.
Customization of Pneumatic Probe
A full range of pneumatic probe customization in accordance with customer demand.
Testing Center
Used for calibration of pneumatic probe, pressure scanning valve, temperature sensor, pitot tube, digital pressure gauge and other equipment.
5-Hole Differential Pressure Airspeed Probe
Provide flight height, speed, angle of attack, sideslip angle and other valuable parameters for the aircraft.
Micro 5-Hole Probe Anemometer
A refined and lightweight device for measuring airflow pressure, speed and direction.
WindLabX Measurement and Control Software
Measurement software capable of equipment control, data acquisition, storage analysis and other functions.
Thermocouple Acquisition Instrument
16 differential temperature acquisition interfaces, suitable for various types of thermocouples.
Supporting Control System
Drive the sensor module to make accurate movement in a three-dimensional coordinate system, providing efficient and accurate measurement.
Support center
Fine knowledge of the product
FAQs at a glance
