Press releases, press photos and other material for editorial coverage of Windtuner.
14 Oct 2026
Kiel Probe: How It WorksA Kiel probe measures total pressure using a sensing tip enclosed in a shroud.
09 Oct 2026
What Does a Total Temperature Probe Measure?A total temperature probe does not simply report whatever temperature a sensor reads when placed in moving air.
07 Oct 2026
When to Use a 7-Hole ProbeA 7-hole probe is useful in development tests where engineers need to understand three-dimensional flow direction.
02 Oct 2026
How Is Probe Calibration Performed?Probe calibration is performed on each probe as an individual unit because small differences in geometry and pressure-port layout can change its response.
25 Sep 2026
Probe Calibration: When Is It Needed?Probe calibration should be considered before first use, after a measurement configuration changes, when a test falls outside the original calibration envelope, after impact or repair, when data becomes abnormal, and at the recalibration points defined by the project.
21 Sep 2026
Total Pressure Probe: How It WorksA total pressure probe slows the air in a controlled way at the correct location, captures the resulting total pressure, and uses static pressure and other required parameters as references for the calculation.
18 Sep 2026
How WindLabX Measurement and Control Software Brings Flow Measurement Instruments into One Test WorkflowWINDTUNER develops the WindLabX software series using LabVIEW graphical programming. Core functions include device management, data acquisition, storage and review, and parameter settings. The software can also be customized for individual projects.
16 Sep 2026
How a Thermocouple Scanner Handles Multichannel Temperature Acquisition: From Sensor Wiring to Synchronized RecordsA thermocouple scanner collects multiple thermocouple signals, records them, and sends the data to a host computer.
11 Sep 2026
From the X-59 Flight Tests to a Supersonic Wind Tunnel: Why Supersonic Measurement Depends on CalibrationPneumatic probes, pitot tubes, and temperature sensors must be calibrated or otherwise verified under relevant flow conditions, and a supersonic wind tunnel is one of the key facilities for that work.
Welcome to learn more detailed practical cases！Product recommendation
Ethernet Intelligent Pressure Scanners
Accurate, stable and high performance gas pressure measurements for: aero engines, gas turbines, and wind tunnel experiments.
Customization of Pneumatic Probe
A full range of pneumatic probe customization in accordance with customer demand.
Testing Center
Used for calibration of pneumatic probe, pressure scanning valve, temperature sensor, pitot tube, digital pressure gauge and other equipment.
5-Hole Differential Pressure Airspeed Probe
Provide flight height, speed, angle of attack, sideslip angle and other valuable parameters for the aircraft.
Micro 5-Hole Probe Anemometer
A refined and lightweight device for measuring airflow pressure, speed and direction.
WindLabX Measurement and Control Software
Measurement software capable of equipment control, data acquisition, storage analysis and other functions.
Thermocouple Acquisition Instrument
16 differential temperature acquisition interfaces, suitable for various types of thermocouples.
Supporting Control System
Drive the sensor module to make accurate movement in a three-dimensional coordinate system, providing efficient and accurate measurement.
Support center
Fine knowledge of the product
FAQs at a glance
