AEROTEC 2026 will take place from September 30 to October 2 at the Changwon Exhibition Convention Center (CECO) in South Korea. At Booth A-18, WINDTUNER will exhibit a range of products for aerospace testing and flow measurement, including pressure scanners, pneumatic probes, anemometers, airspeed probes, and thermocouple data acquisition units. Industry professionals working in wind tunnel testing, aircraft development, and propulsion-system testing can see how the equipment is used and discuss their applications directly with the WINDTUNER team.
A Focused Look at Aerospace Test and Measurement Needs
AEROTEC 2026 is the second International Aerospace Technology Expo. Its exhibits span aviation, space, unmanned aircraft, defense, future air mobility, and related materials, components, and test equipment. For a measurement equipment supplier, an event like this creates a place to discuss the actual test rather than a single instrument in isolation: what needs to be measured, where the measurement will be taken, how many channels are required, how the data will be collected, and how the equipment needs to work together.
WINDTUNER develops products and provides technical services for flow measurement and control. Products at the booth will include pressure scanners, pneumatic probes, anemometers, airspeed probes, and thermocouple data acquisition units. Each can be used independently or combined with other equipment to suit the test. At the booth, you can also discuss practical questions such as measurement-point layout, operating range, installation space, data acquisition, equipment selection, and system configuration.
WINDTUNER develops products and provides technical services for flow measurement and control. Products at the booth will include pressure scanners, pneumatic probes, anemometers, airspeed probes, and thermocouple data acquisition units. Each can be used independently or combined with other equipment to suit the test. At the booth, you can also discuss practical questions such as measurement-point layout, operating range, installation space, data acquisition, equipment selection, and system configuration.
Products for Different Measurement Tasks
A pressure scanner brings signals from many pressure points into one instrument. It can be used for model surface pressure measurements, wind tunnel testing, and other multipoint pressure tests. A pneumatic probe senses pressure changes in a flow through one or more pressure ports. Depending on its geometry and calibration data, it can be used to measure total pressure, static pressure, flow velocity, and flow direction. WINDTUNER also customizes probes for tests with unusual measurement locations, installation constraints, or operating ranges.
An anemometer measures airspeed and related flow parameters in laboratory, research, and field applications. An airspeed probe supplies total-pressure, static-pressure, and other signals used by downstream systems to calculate aircraft airspeed and air data. A thermocouple data acquisition unit records temperature signals from multiple channels and can be used with different thermocouple types for thermal monitoring and temperature testing. These products measure different quantities, but useful data still depends on the complete chain: sensors, acquisition hardware, connections, and software settings.
An anemometer measures airspeed and related flow parameters in laboratory, research, and field applications. An airspeed probe supplies total-pressure, static-pressure, and other signals used by downstream systems to calculate aircraft airspeed and air data. A thermocouple data acquisition unit records temperature signals from multiple channels and can be used with different thermocouple types for thermal monitoring and temperature testing. These products measure different quantities, but useful data still depends on the complete chain: sensors, acquisition hardware, connections, and software settings.
Visit WINDTUNER at Booth A-18
During the expo, WINDTUNER will be available to discuss product selection, custom probes, measurement-channel configuration, calibration conditions, and data acquisition. Whether your project is still at the concept stage or already moving into equipment selection and test preparation, you are welcome to bring the operating conditions to Booth A-18. We can review practical requirements such as installation, range, and interfaces together.
AEROTEC 2026 is open from 10:00 a.m. to 5:00 p.m. on September 30 and October 1, and from 10:00 a.m. to 4:00 p.m. on October 2. WINDTUNER will be at Booth A-18 with pressure scanners, pneumatic probes, anemometers, airspeed probes, and thermocouple data acquisition units. If you work in aerospace research, development, testing, or measurement, we invite you to stop by, see the products, and discuss your project.
AEROTEC 2026 is open from 10:00 a.m. to 5:00 p.m. on September 30 and October 1, and from 10:00 a.m. to 4:00 p.m. on October 2. WINDTUNER will be at Booth A-18 with pressure scanners, pneumatic probes, anemometers, airspeed probes, and thermocouple data acquisition units. If you work in aerospace research, development, testing, or measurement, we invite you to stop by, see the products, and discuss your project.
